有机分析研究进展——单原子、单分子、单细胞的分析进展

简要地对单原子、单分子、单细胞的分析方法和研究进展情况进行了评述 ,共引用文献 193篇     

一种新型钛体系（Ⅳ）──α－酮酸钛酸酯与锂试剂的还原反应

一种新型钛体系（Ⅳ）──α－酮酸钛酸酯与锂试剂的还原反应段新方，尹承烈（北京师范大学化学系，北京，１００８７５）关键词加成，还原，钛酸酯，交换反应由于钛的优良调整作用，使得锂试剂ＲＬｉ不仅可以和α－酮酸钛酸酯ＡｒＣＯＣＯＯＴｉ（ＯＲ１）３中的酮发生加...     

Polynuclear manganese grids and clusters—A magnetic perspective

High nuclearity paramagnetic, spin-coupled transition metal clusters and grids are fascinating chemists and physicists partly because of their structural beauty, and the challenge of creating them, but also because of their novel physical properties. Magnetic interactions between the spin centers are a primary focus. This review will examine a selection of Mn(II) polynuclear grids and clusters, with nuclearities in the range Mn₄ to Mn₉. Theoretical treatments of the magnetic properties are discussed, and approaches to solving the exchange problem for ‘large’ spin systems related to computational difficulties. A freely available software package (MAGMUN4.1) is presented as a means of dealing simply with spin-coupled clusters in general, and symmetry reduction methods are discussed briefly as a means of dealing with ‘large’ spin systems.     

The influence of the pore size, the foaming temperature and the viscosity of the continuous phase on the properties of foams produced by membrane foaming

Membrane foaming is a new method of foaming. To enlarge the knowledge about the influencing factors and to know how to vary the structure of the resulting foam, different factors were evaluated. A whey protein solution with 10% protein was foamed as a model solution by means of a tubular cross-flow filtration membrane. The pore size of the membrane was varied. The smaller the pore size, the smaller the bubbles produced. As a result, the foam firmness increases and less drainage was observed when smaller pore sizes were applied.

An important factor is that the added amount of gas must be stabilised as completely as possible in the foam. In order to achieve this, both the process and the product parameters were varied. Raising the foaming temperature increased the quantity of stabilised gas. The whey proteins then diffuse faster to the bubble surfaces and stabilise these by unfolding and networking reactions to prevent the coalescence of the bubbles.

The product parameter viscosity was found to influence the foaming result in such a way that up to a viscosity of 40 mPa s the incorporated gas bubbles are stabilised by the higher viscosity. At viscosities higher than 40 mPa s it is difficult to incorporate in the bubbles, and the foam structure becomes coarser due to increased coalescence at the pores of the membrane. The foam stability is enhanced with higher viscosities.     

Zr（Ⅳ）／PVA功能膜的膜催化酯化反应研究

在催化与渗透汽化分离技术相偶合的渗透汽化型膜反应器中，研究了羧酸酯的液相合成反应．实验中制备了两类具有强酸催化活性的ｚｒ（Ⅳ）／ＰＶＡ（聚乙烯醇）功能膜，采用管式膜方式，以乙酸正丁酯的合成反应为探针，对这类新型的催化反应技术在催化活性、分离性能以及分离对反应转化的影响等方面进行了探索性研究。从得到的结果看，膜催化酯化反应过程的反应条件和缓，转化率可达到９８％，反应的选择性为１００％．     

液膜稳定性的研究

利用单滴法对三种表面活性剂的液膜体系的稳定性进行了研究，重点考察了载体的影响，讨论了介质与表面活性剂，介质与载体，载体与表面活性剂的相互作用对液膜稳定性的影响，并根据膜强度数据，给出了液膜稳定的条件。     

成骨肿瘤细胞在纳米氧化钛陶瓷表面的生物活性研究

以羟基磷灰石和氧化镁为晶粒生长抑制剂制备的纳米氧化钛陶瓷为研究对象, 采用体外成骨细胞Ros17/28与材料复合培养的方法, 通过MTT法、荧光染色法和SEM细胞形貌观察等手段综合判断细胞在材料表面的活性, 以此评价纳米氧化钛陶瓷的生物活性. 结果表明, 以羟基磷灰石为晶粒生长抑制剂的氧化钛陶瓷晶体颗粒尺寸达到纳米级, 其生物活性超出了以氧化镁为晶粒生长抑制剂的氧化钛陶瓷和纯羟基磷灰石陶瓷, 具有优异的生物相容性, 是生物活性陶瓷.     

Genomic variation and point mutations analysis of Indian COVID-19 patient samples submitted in GISAID database

Corona virus disease 2019 (COVID-19) endemic has havoc on the world; the causative virus of the pandemic is SARS CoV-2. Pharmaceutical companies and academic institutes are in continuous efforts to identify anti-viral therapy or vaccines, but the most significant challenge faced is the highly evolving genome of SARS CoV-2, which is imparting evolutionary selective benefits to the virus. To understand the viral mutations, we have retrieved nine hundred and thirty-four samples from different states of India via the GISAID database and analyzed the frequency of all types of point mutation in all structural, non-structural proteins, and accessory factors of SARS CoV-2. Spike glycol protein, nsp3, nsp6, nsp12, N and NS3 were the most evolving proteins. High frequency point mutations were Q496P (nsp2), A380V (nsp4), A994D (nsp3), L37F (nsp6), P323L & A97V (nsp12), Q57H (ns3), D614G (S), P13L (N), R203K (N), G204R (N) and S194L (N).     

Extended applications of electric cell-substrate impedance sensing for assessment of the structure-function of α2β1 integrin

Electric cell-substrate impedance sensing (ECIS) was applied to assess the structure-function of α2β1 integrin, receptor for collagen and laminin. On collagen-coated gold electrodes, expression of this integrin on human rhabdomyosarcoma (RD) cells (RDX2C2) yielded a five-fold increase in resistance when compared with mock transfected RD (RDpF) cells (34.5±5.2 versus 6.5±0.8 Ω/cell). An intermediate level of 16±2 Ω/cell was measured upon expression of an α2β1 mutant that lacked the α2 cytoplasmic domain (RDX2CO). On laminin, the resistance measured for RDX2C2 cells was also higher but only twice that of RDpF cells at 71±4 and 37±4 Ω/cell, respectively. In comparison, RDX2CO cells (38±4 Ω/cell), exhibiting no enhanced adhesive function, yielded a similar result to that of RDpF cells. On fibronectin, RDX2C2 and RDpF cells, exhibiting comparable levels of adhesion, were similar in resistance measurements at 85±5and 89±7 Ω/cell, respectively. It has been shown that deletion of α2 cytoplasmic domain results in dysregulated recruitment of the α2β1 mutant to focal adhesion complexes that mediate binding of fibronectin. RDX2CO cells on fibronectin, exhibiting reduced adhesive function, was associated with noticeably lower resistance (60±4 Ω/cell). Monitoring electroporation of the RD plasma membrane also indirectly validated cell attachment as reflected by the resistance measured. Results from this study demonstrated the potential of ECIS for study of the structure-function of βl integrin adhesion receptors.     

Imide-siloxane block copolymer/silica hybrid membranes: preparation, characterization and gas separation properties

Imide-siloxane block copolymer/silica hybrid membranes with covalent bonds were prepared via sol–gel reaction. The structural informations of these hybrid membranes were obtained by using Fourier transform-infrared spectrometry (FT-IR), ²⁹Si nuclear magnetic resonance (²⁹Si NMR), XPS and thermogravimetric analysis (TGA). The gas separation properties of the hybrid membranes were also investigated in terms of organosiloxane (PDMS) or silica content at various temperatures. In the hybrids, the addition of PDMS phase increased the permeabilities of gases such as He, CO₂, O₂, and N₂, indicating that the gas transport occurred mainly through rubbery organic matrix. Meanwhile, the PDMS phase contributed the decreased gas selectivities to nitrogen but the reduction in selectivities was very small in comparison with other siloxane containing polymeric membranes. This might be due to the restriction of chain mobility by the existence of inorganic component such as silica network in the hybrids. Additionally, the increase of silica content in these hybrid membranes considerably retarded the falling-off of gas selectivity at elevated temperature. The increase of silica content in hybrid membranes resulted in well-formed silica networks and hence these inorganic components restricted the plasticization of organic matrix by the thermal segmental motion of organic components, leading to preventing the large decrease of the gas selectivity.